EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 6 (2021) Renew. Energy Environ. Sustain., 6 (2021) 38 References
Issue
Renew. Energy Environ. Sustain.
Volume 6, 2021
Achieving Zero Carbon Emission by 2030
Article Number 38
Number of page(s) 13
DOI https://doi.org/10.1051/rees/2021040
Published online 20 October 2021
  1. IEA, The Future of Cooling: Opportunities for Energy-Efficient Air Conditioning (Internal Energy Agency, 2018) [Google Scholar]
  2. Q. Al-Yasiri, G. Géczi, Global warming potential: causes and consequences, Acad. Lett. 3202 (2021) [Google Scholar]
  3. IEA, CO2 Emissions from Fuel Combustion (International Energy Agency, 2020) [Google Scholar]
  4. G. Alva, Y. Lin, G. Fang, An overview of thermal energy storage systems, Energy 144, 341–378 (2018) [CrossRef] [Google Scholar]
  5. N. Essid, A. Eddhahak-Ouni, J. Neji, Experimental and numerical thermal properties investigation of cement-based materials modified with PCM for building construction use, J. Archit. Eng. 26, 1–9 (2020) [Google Scholar]
  6. P. Sukontasukkul, T. Sutthiphasilp, W. Chalodhorn, P. Chindaprasirt, Improving thermal properties of exterior plastering mortars with phase change materials with different melting temperatures: paraffin and polyethylene glycol, Adv. Build. Energy Res. 13, 220–240 (2019) [CrossRef] [Google Scholar]
  7. A. Adesina, Use of phase change materials in concrete: current challenges, Renew. Energy Environ. Sustain. 4, 9 (2019) [CrossRef] [EDP Sciences] [Google Scholar]
  8. U. Berardi, A.A. Gallardo, Properties of concretes enhanced with phase change materials for building applications, Energy Build. 199, 402–414 (2019) [CrossRef] [Google Scholar]
  9. P. Sukontasukkul, E. Intawong, P. Preemanoch, P. Chindaprasirt, Use of paraffin impregnated lightweight aggregates to improve thermal properties of concrete panels, Mater. Struct. 49, 1793–1803 (2016) [CrossRef] [Google Scholar]
  10. E. Tunçbilek, M. Arıcı, S. Bouadila, S. Wonorahardjo, Seasonal and annual performance analysis of PCM-integrated building brick under the climatic conditions of Marmara region, J. Therm. Anal. Calorim. 141, 613–624 (2020) [CrossRef] [Google Scholar]
  11. Q. Al-Yasiri, M. Szabó, Thermal performance of concrete bricks based phase change material encapsulated by various aluminium containers: an experimental study under iraqi hot climate conditions, J. Energy Storage 40, 102710 (2021) [CrossRef] [Google Scholar]
  12. K. Kant, A. Shukla, A. Sharma, Heat transfer studies of building brick containing phase change materials, Sol. Energy 155, 1233–1242 (2017) [CrossRef] [Google Scholar]
  13. M. Mahdaoui, S. Hamdaoui, A. Ait Msaad, T. Kousksou, T. El Rhafiki, A. Jamil, M. Ahachad, Building bricks with phase change material (PCM): thermal performances, Constr. Build. Mater. 269, 121315 (2021) [CrossRef] [Google Scholar]
  14. Q. Al-Yasiri, M. Szabó, Effect of encapsulation area on the thermal performance of PCM incorporated concrete bricks: a case study under Iraq summer conditions, Case Stud. Constr. Mater. 15, e00686 (2021) [Google Scholar]
  15. C. Nie, S. Deng, H. Guo, J. Liu, Effects of partially thermally active walls on simultaneous charging and discharging of paraffin wax in a square cavity, Energy Convers. Manag. 202, 112201 (2019) [CrossRef] [Google Scholar]
  16. M. Arıcı, F. Bilgin, S. Nižetić, H. Karabay, PCM integrated to external building walls: an optimization study on maximum activation of latent heat, Appl. Therm. Eng. 165, 114560 (2020) [CrossRef] [Google Scholar]
  17. E. Tunçbilek, M. Arıcı, M. Krajčík, S. Nižetić, H. Karabay, Thermal performance based optimization of an office wall containing PCM under intermittent cooling operation, Appl. Therm. Eng. 179, 115750 (2020) [CrossRef] [Google Scholar]
  18. H.J. Akeiber, M.A. Wahid, H.M. Hussen, A.T. Mohammad, A newly composed paraffin encapsulated prototype roof structure for efficient thermal management in hot climate, Energy 104, 99–106 (2016) [CrossRef] [Google Scholar]
  19. J. Yu, Q. Yang, H. Ye, J. Huang, Y. Liu, J. Tao, The optimum phase transition temperature for building roof with outer layer PCM in different climate regions of China, Energy Proc. 158, 3045–3051 (2019) [CrossRef] [Google Scholar]
  20. Q. Al-Yasiri, M. Szabó, Experimental evaluation of the optimal position of a macroencapsulated phase change material incorporated composite roof under hot climate conditions, Sustain. Energy Technol. Assess. 45, 101121 (2021) [Google Scholar]
  21. J. Guo, B. Zou, Y. Wang, Y. Jiang, Space heating performance of novel ventilated mortar blocks integrated with phase change material for floor heating, Build. Environ. 185, 107175 (2020) [CrossRef] [Google Scholar]
  22. Q. Yan, J. Zhang, C. Liu, Thermal storage performance of paraffin and fatty acid mixtures used in walls and floors, Mater. Res. Express 6, 105522 (2019) [CrossRef] [Google Scholar]
  23. D. Li, B. Wang, Q. Li, C. Liu, M. Arıcı, Y. Wu, A numerical model to investigate non-gray photothermal characteristics of paraffin-containing glazed windows, Sol. Energy 194, 225–238 (2019) [CrossRef] [Google Scholar]
  24. G. Zhang, Z. Wang, D. Li, Y. Wu, M. Arıcı, Seasonal thermal performance analysis of glazed window filled with paraffin including various nanoparticles, Int. J. Energy Res. 44, 3008–3019 (2020) [CrossRef] [Google Scholar]
  25. D. Li, Y. Wu, C. Liu, G. Zhang, M. Arıcı, Energy investigation of glazed windows containing Nano-PCM in different seasons, Energy Convers. Manag. 172, 119–128 (2018) [CrossRef] [Google Scholar]
  26. I. Vigna, L. Bianco, F. Goia, V. Serra, Phase change materials in transparent building envelopes: a strengths, weakness, opportunities and threats (SWOT) analysis, Energies 11 (2018) [Google Scholar]
  27. Q. Al-Yasiri, M. Szabó, Case study on the optimal thickness of phase change material incorporated composite roof under hot climate conditions, Case Stud. Constr. Mater. 14, e00522 (2021) [Google Scholar]
  28. Q. Al-Yasiri, M. Szabó, Incorporation of phase change materials into building envelope for thermal comfort and energy saving: A comprehensive analysis, J. Build. Eng. 36, 102122 (2021) [CrossRef] [Google Scholar]
  29. A. de Gracia, Dynamic building envelope with PCM for cooling purposes − proof of concept, Appl. Energy 235, 1245–1253 (2019) [CrossRef] [Google Scholar]
  30. Q. Al-Yasiri, M. Szabó, Performance assessment of phase change materials integrated with building envelope for heating application in cold locations, Eur. J. Energy Res. 1, 7–14 (2021) [CrossRef] [Google Scholar]
  31. W. Lin, Z. Ma, H. Ren, J. Liu, K. Li, Solar thermal energy storage using paraffins as phase change materials for air conditioning in the built environment, in Paraffins (IntechOpen, 2019) [Google Scholar]
  32. R. Zeinelabdein, S. Omer, G. Gan, Critical review of latent heat storage systems for free cooling in buildings, Renew. Sustain. Energy Rev. 82, 2843–2868 (2018) [CrossRef] [Google Scholar]
  33. H. Mehling, L.F. Cabeza, Heat and Cold Storage with PCM (Springer, 2008), Vol. 308 [CrossRef] [Google Scholar]
  34. W.R. Turner, D.S. Brown, D.V. Harrison, Properties of paraffin waxes, Ind. Eng. Chem. 47, 1219–1226 (1955) [CrossRef] [Google Scholar]
  35. R. Gulfam, P. Zhang, Z. Meng, Advanced thermal systems driven by paraffin-based phase change materials − a review, Appl. Energy 238(January), 582–611 (2019) [CrossRef] [Google Scholar]
  36. M. Lehto, R. Boden, U. Simu, K. Hjort, G. Thornell, J.-Å. Schweitz, A polymeric paraffin microactuator, J. Microelectr. Syst. 17, 1172–1177 (2008) [CrossRef] [Google Scholar]
  37. I. Nakagawa, S. Hikone, Study on the regression rate of paraffin-based hybrid rocket fuels, J. Propuls. Power 27, 1276–1279 (2011) [CrossRef] [Google Scholar]
  38. S.K. Mandal, S. Kumar, P.K. Singh, S.K. Mishra, H. Bishwakarma, N.P. Choudhry, R.K. Nayak, A.K. Das, Performance investigation of CuO-paraffin wax nanocomposite in solar water heater during night, Thermochim. Acta 671, 36–42 (2019) [CrossRef] [Google Scholar]
  39. S. Bellan, A. Cordiviola, S. Barberis, A. Traverso, J. González-Aguilar, M. Romero, Numerical analysis of latent heat storage system with encapsulated phase change material in spherical capsules, Renew. Energy Environ. Sustain. 2, 3 (2017) [CrossRef] [EDP Sciences] [Google Scholar]
  40. T.-T. Nguyen, V. Martin, A. Malmquist, C.A.S. Silva, A review on technology maturity of small scale energy storage technologies, Renew. Energy Environ. Sustain. 2, 36 (2017) [CrossRef] [EDP Sciences] [Google Scholar]
  41. D. Das, U. Bordoloi, H.H. Muigai, P. Kalita, A novel form stable PCM based bio composite material for solar thermal energy storage applications, J. Energy Storage 30, 101403 (2020) [CrossRef] [Google Scholar]
  42. H. Huang, Y. Xiao, J. Lin, T. Zhou, Y. Liu, Q. Zhao, Improvement of the efficiency of solar thermal energy storage systems by cascading a PCM unit with a water tank, J. Clean. Prod. 245, 118864 (2020) [CrossRef] [Google Scholar]
  43. P. Rolka, T. Przybylinski, R. Kwidzinski, M. Lackowski, The heat capacity of low-temperature phase change materials (PCM) applied in thermal energy storage systems, Renew. Energy 172, 541–550 (2021) [CrossRef] [Google Scholar]
  44. G. Dogkas, J. Konstantaras, M.K. Koukou, V.N. Stathopoulos, L. Coelho, A. Rebola, Evaluating a prototype compact thermal energy storage tank using paraffin-based phase change material for domestic hot water production, in E3S Web of Conferences (EDP Sciences, 2019), Vol. 116, p. 16 [Google Scholar]
  45. A.K. Alsharaa, Numerical simulation of packed bed cubical storage unit filled with spherical capsules of PCM, Wasit J. Eng. Sci. 6, 39–50 (2018) [CrossRef] [Google Scholar]
  46. A.A.M. Omara, A.A.A. Abuelnour, Improving the performance of air conditioning systems by using phase change materials: a review, Int. J. Energy Res. 43, 5175–5198 (2019) [CrossRef] [Google Scholar]
  47. E. Varvagiannis, A. Charalampidis, G. Zsembinszki, S. Karellas, L.F. Cabeza, Energy assessment based on semi-dynamic modelling of a photovoltaic driven vapour compression chiller using phase change materials for cold energy storage, Renew. Energy 163, 198–212 (2021) [CrossRef] [Google Scholar]
  48. B. Nie, Z. Du, B. Zou, Y. Li, Y. Ding, Performance enhancement of a phase-change-material based thermal energy storage device for air-conditioning applications, Energy Build. 214, 109895 (2020) [CrossRef] [Google Scholar]
  49. B. Nie, Z. Du, J. Chen, B. Zou, Y. Ding, Performance enhancement of cold energy storage using phase change materials with fumed silica for air‐conditioning applications, Int. J. Energy Res. 45, 16565–16575 (2021) [CrossRef] [Google Scholar]
  50. B. Nie, A. Palacios, B. Zou, J. Liu, T. Zhang, Y. Li, Review on phase change materials for cold thermal energy storage applications, Renew. Sustain. Energy Rev. 134, 110340 (2020) [CrossRef] [Google Scholar]
  51. M.R. Safaei, H.R. Goshayeshi, I. Chaer, Solar still efficiency enhancement by using graphene oxide/paraffin nano-pcm, Energies 12, 2002 (2019) [CrossRef] [Google Scholar]
  52. M.T. Chaichan, K.I. Abaas, H.A. Kazem, Design and assessment of solar concentrator distillating system using phase change materials (PCM) suitable for desertic weathers, Desalin. Water Treat. 57, 14897–14907 (2016) [CrossRef] [Google Scholar]
  53. M.T. Chaichan, H.A. Kazem, Using aluminium powder with PCM (paraffin wax) to enhance single slope solar water distiller productivity in Baghdad − Iraq winter weathers, Int. J. Renew. Energy Res. 5, 251–257 (2015) [Google Scholar]
  54. M.T. Chaichan, H.A. Kazem, Water solar distiller productivity enhancement using concentrating solar water heater and phase change material (PCM), Case Stud. Therm. Eng. 5, 151–159 (2015) [CrossRef] [Google Scholar]
  55. M.T. Chaichan, H.A. Kazem, Single slope solar distillator productivity improvement using phase change material and Al2O3 nanoparticle, Sol. Energy 164, 370–381 (2018) [CrossRef] [Google Scholar]
  56. D.K. Rabha, P. Muthukumar, Performance studies on a forced convection solar dryer integrated with a paraffin wax-based latent heat storage system, Sol. Energy 149, 214–226 (2017) [CrossRef] [Google Scholar]
  57. S. Ali, S.P. Deshmukh, An overview: applications of thermal energy storage using phase change materials, Mater. Today Proc. 26, 1231–1237 (2020) [CrossRef] [Google Scholar]
  58. M. Mehrali, J.E. ten Elshof, M. Shahi, A. Mahmoudi, Simultaneous solar-thermal energy harvesting and storage via shape stabilized salt hydrate phase change material, Chem. Eng. J. 405, 126624 (2021) [CrossRef] [Google Scholar]
  59. F.S. Javadi, H.S.C. Metselaar, P. Ganesan, Performance improvement of solar thermal systems integrated with phase change materials (PCM), a review, Sol. Energy 206, 330–352 (2020) [CrossRef] [Google Scholar]
  60. Q.A. Jawad, A.M.J. Mahdy, A.H. Khuder, M.T. Chaichan, Improve the performance of a solar air heater by adding aluminum chip, paraffin wax, nano-SiC, Case Stud. Therm. Eng. 100622 (2020) [CrossRef] [Google Scholar]
  61. L. Owolabi Afolabi, H. H Al-Kayiem, T. B Aklilu, On the nano-additive enhanced flat plate solar collector integrated with thermal energy storage, Nanosci. Nanotechnology-Asia 7, 172–182 (2017) [Google Scholar]
  62. P. Feliński, R. Sekret, Experimental study of evacuated tube collector/storage system containing paraffin as a PCM, Energy 114, 1063–1072 (2016) [CrossRef] [Google Scholar]
  63. R. Senthil, P. Sundaram, M. Kumar, Experimental investigation on packed bed thermal energy storage using paraffin wax for concentrated solar collector, Mater. Today Proc. 5, 8916–8922 (2018) [CrossRef] [Google Scholar]
  64. K. Balasubramanian, A.K. Pandey, S. Shahabuddin, M. Samykano, T.M.R. Saidur, Phase change materials integrated solar thermal energy systems: global trends and current practices in experimental approaches, J. Energy Storage 27, 101118 (2020) [CrossRef] [Google Scholar]
  65. E. Roslan, A. Razak, Performance effect of applying paraffin wax on solar photovoltaic backplate, Indones. J. Elec. Eng. Comp. Sci.(IJEECS) 14, 375 (2019) [Google Scholar]
  66. A.H.A. Al-Waeli, H.A. Kazem, J.H. Yousif, M.T. Chaichan, K. Sopian, Mathematical and neural network modeling for predicting and analyzing of nanofluid-nano PCM photovoltaic thermal systems performance, Renew. Energy 145, 963–980 (2020) [CrossRef] [Google Scholar]
  67. A.H.A. Al-Waeli, K. Sopian, H.A. Kazem, M.T. Chaichan, Evaluation of the electrical performance of a photovoltaic thermal system using nano-enhanced paraffin and nanofluids, Case Stud. Therm. Eng. 21, 100678 (2020) [CrossRef] [Google Scholar]
  68. N.A. Habib, A.J. Ali, M.T. Chaichan, M. Kareem, Carbon nanotubes/paraffin wax nanocomposite for improving the performance of a solar air heating system, Therm. Sci. Eng. Prog. 23, 100877 (2021) [CrossRef] [Google Scholar]
  69. M.T. Chaichan, H.A. Kazem, A.H.A. Al-Waeli, K. Sopian, Controlling the melting and solidification points temperature of PCMs on the performance and economic return of the water-cooled photovoltaic thermal system, Sol. Energy 224, 1344–1357 (2021) [CrossRef] [Google Scholar]
  70. A.H.A. Al-Waeli, K. Sopian, M.T. Chaichan, H.A. Kazem, A. Ibrahim, S. Mat, M.H. Ruslan, Evaluation of the nanofluid and nano-PCM based photovoltaic thermal (PVT) system: an experimental study, Energy Convers. Manag. 151, 693–708 (2017) [CrossRef] [Google Scholar]
  71. X. Zhu, X. Li, J. Shen, B. Wang, Z. Mao, H. Xu, X. Feng, X. Sui, Stable microencapsulated phase change materials with ultrahigh payload for efficient cooling of mobile electronic devices, Energy Convers. Manag. 223, 113478 (2020) [CrossRef] [Google Scholar]
  72. F. Rostamian, N. Etesami, M. Haghgoo, Management of electronic board temperature using heat sink containing pure and microencapsulated phase change materials, Int. Commun. Heat Mass Transf. 126, 105407 (2021) [CrossRef] [Google Scholar]
  73. M. Baba, K. Nemoto, D. Otaki, T. Sasaki, M. Takeda, N. Yamada, Temperature leveling of electronic chips by solid-solid phase change materials compared to solid-liquid phase change materials, Int. J. Heat Mass Transf. 179, 121731 (2021) [CrossRef] [Google Scholar]
  74. H. Bashirpour‐Bonab, Thermal behavior of lithium batteries used in electric vehicles using phase change materials, Int. J. Energy Res. 44, 12583–12591 (2020) [CrossRef] [Google Scholar]
  75. A. Reza Vakhshouri, Paraffin as Phase Change Material, in Paraffin − an Overview, edited by F.S. Soliman (IntechOpen, 2019) [Google Scholar]
  76. B.P. Jelle, S.E. Kalnæs, Phase change materials for application in energy-efficient buildings, in Cost-Effective Energy Efficient Building Retrofitting: Materials, Technologies, Optimization and Case Studies (Elsevier Ltd, 2017), pp. 57–118 [CrossRef] [Google Scholar]
  77. Q. Al-Yasiri, M. Szabó, Influential aspects on melting and solidification of PCM energy storage containers in building envelope applications, Int. J. Green Energy 18, 966–986 (2021) [CrossRef] [Google Scholar]
  78. Y. Qu, J. Chen, L. Liu, T. Xu, H. Wu, X. Zhou, Study on properties of phase change foam concrete block mixed with paraffin/fumed silica composite phase change material, Renew. Energy 150, 1127–1135 (2020) [CrossRef] [Google Scholar]
  79. L. Liu, J. Chen, Y. Qu, T. Xu, H. Wu, G. Huang, X. Zhou, L. Yang, A foamed cement blocks with paraffin/expanded graphite composite phase change solar thermal absorption material, Sol. Energy Mater. Sol. Cells 200, 110038 (2019) [CrossRef] [Google Scholar]
  80. A. Thongtha, A. Khongthon, T. Boonsri, C. Hoy-Yen, Thermal effectiveness enhancement of autoclaved aerated concrete wall with PCM-contained conical holes to reduce the cooling load, Materials (Basel) 12, 2170 (2019) [CrossRef] [Google Scholar]
  81. S.-Q. Tian, S.-F. Yu, X. Wang, L.-W. Fan, Z.-T. Yu, X. Xu, J. Ge, Experimental determination and fractal modeling of the effective thermal conductivity of autoclave aerated concrete (AAC) impregnated with paraffin for improved thermal storage performance, Appl. Therm. Eng. 163, 114387 (2019) [CrossRef] [Google Scholar]
  82. A. Frazzica, V. Brancato, V. Palomba, D. La Rosa, F. Grungo, L. Calabrese, E. Proverbio, Thermal performance of hybrid cement mortar-PCMs for warm climates application, Sol. Energy Mater. Sol. Cells 193, 270–280 (2019) [CrossRef] [Google Scholar]
  83. X. Sun, J. Jovanovic, Y. Zhang, S. Fan, Y. Chu, Y. Mo, S. Liao, Use of encapsulated phase change materials in lightweight building walls for annual thermal regulation, Energy 180, 858–872 (2019) [CrossRef] [Google Scholar]
  84. M.I. Hasan, H.O. Basher, A.O. Shdhan, Experimental investigation of phase change materials for insulation of residential buildings, Sustain. Cities Soc. 36, 42–58 (2018) [CrossRef] [Google Scholar]
  85. X. Sun, M.A. Medina, K.O. Lee, X. Jin, Laboratory assessment of residential building walls containing pipe-encapsulated phase change materials for thermal management, Energy 163, 383–391 (2018) [CrossRef] [Google Scholar]
  86. L. Navarro, A. de Gracia, A. Castell, L.F. Cabeza, Experimental study of an active slab with PCM coupled to a solar air collector for heating purposes, Energy Build. 128, 12–21 (2016) [CrossRef] [Google Scholar]
  87. S. Wi, S.J. Chang, S. Kim, Improvement of thermal inertia effect in buildings using shape stabilized PCM wallboard based on the enthalpy-temperature function, Sustain. Cities Soc. 56, 102067 (2020) [CrossRef] [Google Scholar]
  88. A. Sharma, V.V. Tyagi, C.R. Chen, D. Buddhi, Review on thermal energy storage with phase change materials and applications, Renew. Sustain. energy Rev. 13, 318–345 (2009) [CrossRef] [Google Scholar]
  89. V.V. Tyagi, D. Buddhi, PCM thermal storage in buildings: a state of art, Renew. Sustain. Energy Rev. 11, 1146–1166 (2007) [CrossRef] [Google Scholar]
  90. A.R.V.E.-F.S. Soliman, Paraffin as Phase Change Material, in IntechOpen (2020), p. Ch. 5 [Google Scholar]
  91. F.H. Rhodes, C.W. Mason, W.R. Sutton, Crystallization of Paraffin Wax1, Ind. Eng. Chem. 19, 935–938 (1927) [CrossRef] [Google Scholar]
  92. S.W. Ferris, H.C. Cowles, Crystal behavior of paraffin wax, Ind. Eng. Chem. 37, 1054–1062 (1945) [CrossRef] [Google Scholar]
  93. Q. Wang, W. Wei, D. Li, H. Qi, F. Wang, M. Arıcı, Experimental investigation of thermal radiative properties of Al2O3-paraffin nanofluid, Sol. Energy 177, 420–426 (2019) [CrossRef] [Google Scholar]
  94. M. Amin, F. Afriyanti, N. Putra, Thermal properties of paraffin based nano-phase change material as thermal energy storage, IOP Conf. Ser. Earth Environ. Sci. 105 (2018) [Google Scholar]
  95. A. Shahsavar, S. Khanmohammadi, D. Toghraie, H. Salihepour, Experimental investigation and develop ANNs by introducing the suitable architectures and training algorithms supported by sensitivity analysis: measure thermal conductivity and viscosity for liquid paraffin based nanofluid containing Al2O3 nanoparticles, J. Mol. Liq. 276, 850–860 (2019) [CrossRef] [Google Scholar]
  96. A. Nematpour Keshteli, M. Sheikholeslami, Nanoparticle enhanced PCM applications for intensification of thermal performance in building: a review, J. Mol. Liq. 274, 516–533 (2019) [CrossRef] [Google Scholar]
  97. M.T. Chaichan, R.M. Hussein, A.M. Jawad, Thermal conductivity enhancement of iraqi origin paraffin wax by nano-alumina, Al-Khwarizmi Eng. J. 13, 83–90 (2017) [CrossRef] [Google Scholar]
  98. Y. Zhu, Y. Qin, C. Wei, S. Liang, X. Luo, J. Wang, L. Zhang, Nanoencapsulated phase change materials with polymer-SiO2 hybrid shell materials: compositions, morphologies, and properties, Energy Convers. Manag. 164, 83–92 (2018) [CrossRef] [Google Scholar]
  99. K.Y. Leong, M.R. Abdul Rahman, B.A. Gurunathan, Nano-enhanced phase change materials: a review of thermo-physical properties, applications and challenges, J. Energy Storage 21, 18–31 (2019) [CrossRef] [Google Scholar]
  100. Q. Al-Yasiri, M. Szabó, M. Arıcı, Single and hybrid nanofluids to enhance performance of flat plate solar collectors: application and obstacles, Period. Polytech. Mech. Eng. 65, 86–102 (2021) [Google Scholar]
  101. L.S. Sundar, K.V. Sharma, M.K. Singh, A.C.M. Sousa, Hybrid nanofluids preparation, thermal properties, heat transfer and friction factor − a review, Renew. Sustain. Energy Rev. 68, 185–198 (2017) [CrossRef] [Google Scholar]
  102. V. Saydam, X. Duan, Dispersing different nanoparticles in paraffin wax as enhanced phase change materials, J. Therm. Anal. Calorim. 135, 1135–1144 (2019) [CrossRef] [Google Scholar]
  103. J. Jeon, J.H. Park, S. Wi, K.-H. Kim, S. Kim, Thermal performance enhancement of a phase change material with expanded graphite via ultrasonication, J. Ind. Eng. Chem. 79, 437–442 (2019) [CrossRef] [Google Scholar]
  104. M. Kenisarin, K. Mahkamov, F. Kahwash, I. Makhkamova, Enhancing thermal conductivity of paraffin wax 53-57 °C using expanded graphite, Sol. Energy Mater. Sol. Cells 200, 110026 (2019) [CrossRef] [Google Scholar]
  105. M. Karthik, A. Faik, B. D'Aguanno, Graphite foam as interpenetrating matrices for phase change paraffin wax: A candidate composite for low temperature thermal energy storage, Sol. Energy Mater. Sol. Cells 172, 324–334 (2017) [CrossRef] [Google Scholar]
  106. Z.A. Qureshi, H.M. Ali, S. Khushnood, Recent advances on thermal conductivity enhancement of phase change materials for energy storage system: a review, Int. J. Heat Mass Transf. 127, 838–856 (2018) [CrossRef] [Google Scholar]
  107. H.M. Ali, Experimental investigation on paraffin wax integrated with copper foam based heat sinks for electronic components thermal cooling, Int. Commun. Heat Mass Transf. 98, 155–162 (2018) [CrossRef] [Google Scholar]
  108. X. Xiao, P. Zhang, M. Li, Preparation and thermal characterization of paraffin/metal foam composite phase change material, Appl. Energy 112, 1357–1366 (2013) [CrossRef] [Google Scholar]
  109. M.E. Zayed, J. Zhao, W. Li, A.H. Elsheikh, A.M. Elbanna, L. Jing, A.E. Geweda, Recent progress in phase change materials storage containers: Geometries, design considerations and heat transfer improvement methods, J. Energy Storage 30, 101341 (2020) [CrossRef] [Google Scholar]
  110. S.A. Shehzad, B. Alshuraiaan, M.S. Kamel, M. Izadi, T. Ambreen, Influence of fin orientation on the natural convection of aqueous-based nano-encapsulated PCMs in a heat exchanger equipped with wing-like fins, Chem. Eng. Process. − Process Intensif. 108287 (2020) [Google Scholar]
  111. R. Elarem, T. Alqahtani, S. Mellouli, F. Askri, A. Edacherian, T. Vineet, I.A. Badruddin, J. Abdelmajid, A comprehensive review of heat transfer intensification methods for latent heat storage units, Energy Storage e127 (n.d.) [Google Scholar]
  112. P.K.S. Rathore, S.K. Shukla, N.K. Gupta, Synthesis and characterization of the paraffin/expanded perlite loaded with graphene nanoparticles as a thermal energy storage material in buildings, J. Sol. Energy Eng. 142 (2020) [Google Scholar]
  113. M. Zhang, C. Wang, A. Luo, Z. Liu, X. Zhang, Molecular dynamics simulation on thermophysics of paraffin/EVA/graphene nanocomposites as phase change materials, Appl. Therm. Eng. 166, 114639 (2020) [CrossRef] [Google Scholar]
  114. N. Şahan, M. Fois, H. Paksoy, The effects of various carbon derivative additives on the thermal properties of paraffin as a phase change material, Int. J. Energy Res. 40, 198–206 (2016) [CrossRef] [Google Scholar]
  115. Y. Zhou, C. Li, H. Wu, S. Guo, Construction of hybrid graphene oxide/graphene nanoplates shell in paraffin microencapsulated phase change materials to improve thermal conductivity for thermal energy storage, Colloids Surf. A 124780 (2020) [CrossRef] [Google Scholar]
  116. A.H. Ali, S.I. Ibrahim, Q.A. Jawad, R.S. Jawad, M.T. Chaichan, Effect of nanomaterial addition on the thermophysical properties of Iraqi paraffin wax, Case Stud. Therm. Eng. 15, 100537 (2019) [CrossRef] [Google Scholar]
  117. M. Li, Q. Guo, S. Nutt, Carbon nanotube/paraffin/montmorillonite composite phase change material for thermal energy storage, Sol. Energy 146, 1–7 (2017) [CrossRef] [Google Scholar]
  118. J. Wang, H. Xie, Y. Li, Thermal properties of phase change composites containing ferric oxide nanoparticles, J. Nanosci. Nanotechnol. 15, 3276–3279 (2015) [CrossRef] [Google Scholar]
  119. G. Raza, Y. Shi, Y. Deng, Expanded graphite as thermal conductivity enhancer for paraffin wax being used in thermal energy storage systems, in 2016 13th International Bhurban Conference on Applied Sciences and Technology (IBCAST) (IEEE, 2016), pp. 1–12 [Google Scholar]
  120. B. Zhang, Y. Tian, X. Jin, T.Y. Lo, H. Cui, Thermal and mechanical properties of expanded graphite/paraffin gypsum-based composite material reinforced by carbon fiber, Materials (Basel) 11 (2018) [Google Scholar]
  121. C. Ma, Y. Zhang, X. Chen, X. Song, K. Tang, Experimental study of an enhanced phase change material of paraffin/expanded graphite/nano-metal particles for a personal cooling system, Materials (Basel) 13, 980 (2020) [CrossRef] [Google Scholar]
  122. C. Wang, T. Lin, N. Li, H. Zheng, Heat transfer enhancement of phase change composite material: copper foam/paraffin, Renew. Energy 96, 960–965 (2016) [CrossRef] [Google Scholar]
  123. Y. Li, J. Li, Y. Deng, W. Guan, X. Wang, T. Qian, Preparation of paraffin/porous TiO2 foams with enhanced thermal conductivity as PCM, by covering the TiO2 surface with a carbon layer, Appl. Energy 171, 37–45 (2016) [CrossRef] [Google Scholar]
  124. B. Shang, J. Hu, R. Hu, J. Cheng, X. Luo, Modularized thermal storage unit of metal foam/paraffin composite, Int. J. Heat Mass Transf. 125, 596–603 (2018) [CrossRef] [Google Scholar]
  125. M. Maleki, P.T. Ahmadi, H. Mohammadi, H. Karimian, R. Ahmadi, H.B.M. Emrooz, Photo-thermal conversion structure by infiltration of paraffin in three dimensionally interconnected porous polystyrene-carbon nanotubes (PS-CNT) polyHIPE foam, Sol. Energy Mater. Sol. Cells 191, 266–274 (2019) [CrossRef] [Google Scholar]
  126. A.M. Abdulateef, J. Abdulateef, S. Mat, K. Sopian, B. Elhub, M.A. Mussa, Experimental and numerical study of solidifying phase-change material in a triplex-tube heat exchanger with longitudinal/triangular fins, Int. Commun. Heat Mass Transf. 90, 73–84 (2018) [CrossRef] [Google Scholar]
  127. A. Arshad, H.M. Ali, M. Ali, S. Manzoor, Thermal performance of phase change material (PCM) based pin-finned heat sinks for electronics devices: effect of pin thickness and PCM volume fraction, Appl. Therm. Eng. 112, 143–155 (2017) [CrossRef] [Google Scholar]
  128. S. Mousavi, M. Siavashi, M.M. Heyhat, Numerical melting performance analysis of a cylindrical thermal energy storage unit using nano-enhanced PCM and multiple horizontal fins, Numer. Heat Transf. Part A Appl. 75, 560–577 (2019) [CrossRef] [Google Scholar]
  129. Z. Khan, Z.A. Khan, Role of extended fins and graphene nano-platelets in coupled thermal enhancement of latent heat storage system, Energy Convers. Manag. 224, 113349 (2020) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.