Issue
Renew. Energy Environ. Sustain.
Volume 7, 2022
Achieving Zero Carbon Emission by 2030
Article Number 7
Number of page(s) 15
DOI https://doi.org/10.1051/rees/2021053
Published online 06 January 2022
  1. European Parliament ‘Directive 2010/31/EU of the European Parliament and of the Council of 19 May 2010 on the energy performance of buildings (recast)’ Official Journal of the European Union 2010; 2010 [Google Scholar]
  2. L. Aelenei, H. Petran et al., New challenge of the public buildings: nZEB findings from IEE RePublic_ZEB Project, Energy Proc. 78, 2016–2021 (2015) [Google Scholar]
  3. L. Aelenei, S. Paduos et al., Implementing cost-optimal methodology in existing public buildings, Energy Proc. 78, 2022–2027 (2015) [Google Scholar]
  4. M. Formentini, S. Lenci, An innovative building envelope (kinetic façade) with shape memory alloys used as actuators and sensors, Autom. Constr. 85, 220–231 (2018) [Google Scholar]
  5. F. Pomponi et al., Energy performance of Double-Skin Façades in temperate climates: a systematic review and meta-analysis, Renew. Sustain. Energy Rev. 54, 1525–1536 (2016) [Google Scholar]
  6. J. Borggaard et al., ‘Control, estimation and optimization of energy efficient buildings, Proc. Am. Control Conf. 837–841 (2009) [Google Scholar]
  7. A. Prieto et al., Feasibility study of self-sufficient solar cooling facade applications in different warm regions, Energies 11 (2018) [Google Scholar]
  8. C. Maurer, C. Cappel, T.E. Kuhn, Progress in building-integrated solar thermal systems, Solar Energy 154, 158–186 (2017) [Google Scholar]
  9. L.G. Valladares-Rendon, G. Schmid, S.-L. Lo, Review on energy savings by solar control techniques and optimal building orientation for the strategic placement of facade shading systems, Energy Build. 140, 458–479 (2019) [Google Scholar]
  10. A. Velasco et al., Assessment of the use of venetian blinds as solar thermal collectors in double skin facades in mediterranean climates, Energies 10 (2017) [Google Scholar]
  11. Y. Sun et al., Thermal evaluation of a double glazing facade system with integrated Parallel Slat Transparent Insulation Material (PS-TIM), Build. Environ. 105, 69–81 (2016) [Google Scholar]
  12. Y. Sun et al., Integrated semi-transparent cadmium telluride photovoltaic glazing into windows: Energy and daylight performance for different architecture designs, Appl. Energy 231, 972–984 (2018) [Google Scholar]
  13. R. O'Hegarty, O. Kinnane, S.J. McCormack, Review and analysis of solar thermal facades, Solar Energy 135, 408–422 (2016) [Google Scholar]
  14. C. Lamnatou et al., Modelling and simulation of Building-Integrated solar thermal systems: behaviour of the system, Renew. Sustain. Energy Rev. 45, 36–51 (2015) [Google Scholar]
  15. A. Buonomano et al., Building-façade integrated solar thermal collectors: energy-economic performance and indoor comfort simulation model of a water based prototype for heating, cooling, and DHW production, Renew. Energy (2018) [Google Scholar]
  16. R. Agathokleous et al., Building facade integrated solar thermal collectors for air heating: experimentation, modelling and applications, Appl. Energy 239, 658–679 (2019) [Google Scholar]
  17. C. Garnier, T. Muneer, J. Currie, Numerical and empirical evaluation of a novel building integrated collector storage solar water heater, Renew. Energy 126, 281–295 (2018) [Google Scholar]
  18. K. Resch-Fauster et al., Overheating protection of solar thermal facades with latent heat storages based on paraffin-polymer compounds, Energy Build. 169, 254–259 (2018) [Google Scholar]
  19. M. Ibanez-Puy et al., Ventilated Active Thermoelectric Envelope (VATE): analysis of its energy performance when integrated in a building, Energy Build. 158, 1586–1592 (2018) [Google Scholar]
  20. F. Guarino et al., PCM thermal storage design in buildings: Experimental studies and applications to solaria in cold climates, Appl. Energy 185, 95–106 (2017) [Google Scholar]
  21. L. Navarro et al., Experimental study of an active slab with PCM coupled to a solar air collector for heating purposes, Energy Build. 128, 12–21 (2016) [Google Scholar]
  22. F. Hengstberger et al., High temperature phase change materials for the overheating protection of facade integrated solar thermal collectors, Energy Build. 124, 1–6 (2016) [Google Scholar]
  23. J. Shen et al., Characteristic study of a novel compact Solar Thermal Facade (STF) with internally extruded pin-fin flow channel for building integration, Appl. Energy 168, 48–64 (2016) [Google Scholar]
  24. W. He et al., CFD and comparative study on the dual-function solar collectors with and without tile-shaped covers in water heating mode, Renew. Energy 86, 1205–1214 (2016) [Google Scholar]
  25. A. Giovanardi et al., Integrated solar thermal facade system for building retrofit, Solar Energy 122, 1100–1116 (2015) [Google Scholar]
  26. W. He et al., Operational performance of a novel heat pump assisted solar facade loop-heat-pipe water heating system, Appl. Energy 146, 371–382 (2015) [Google Scholar]
  27. L. Li, M. Qu, S. Peng, Performance evaluation of building integrated solar thermal shading system: building energy consumption and daylight provision, Energy Build. 113, 189–201 (2016) [Google Scholar]
  28. A.K. Shukla, K. Sudhakar, P. Baredar, A comprehensive review on design of building integrated photovoltaic system, Energy Build. 128, 99–110 (2016) [Google Scholar]
  29. M. Tripathy, P.K. Sadhu, S.K. Panda, A critical review on building integrated photovoltaic products and their applications, Renew. Sustain. Energy Rev. 61, 451–465 (2016) [Google Scholar]
  30. S. Aguacil, S. Lufkin, E. Rey, Active surfaces selection method for building-integrated photovoltaics (BIPV) in renovation projects based on self-consumption and self-sufficiency, Energy Build. 193, 15–28 (2019) [Google Scholar]
  31. X. Chen, H. Yang, J. Peng, Energy optimization of high-rise commercial buildings integrated with photovoltaic facades in urban context, Energy 172, 1–17 (2019) [Google Scholar]
  32. E. Biyik et al., A key review of building integrated photovoltaic (BIPV) systems, Eng. Sci. Technol. 20, 833–858 (2017) [Google Scholar]
  33. A.K. Shukla, K. Sudhakar, P. Baredar, Recent advancement in BIPV product technologies: a review, Energy Build. 140, 188–195 (2017) [Google Scholar]
  34. R.A. Agathokleous, S.A. Kalogirou, Part II: thermal analysis of naturally ventilated BIPV system: modeling and simulation, Solar Energy 169, 682–691 (2018) [Google Scholar]
  35. Y. Cheng et al., An optimal and comparison study on daylight and overall energy performance of double-glazed photovoltaics windows in cold region of China, Energy 170, 356–366 (2019) [Google Scholar]
  36. C. Qiu, H. Yang, W. Zhang, Investigation on the energy performance of a novel semi-transparent BIPV system integrated with vacuum glazing, Build. Simul. 12, 29–39 (2019) [Google Scholar]
  37. O.S. Asfour, Solar and shading potential of different configurations of building integrated photovoltaics used as shading devices considering hot climatic conditions, Sustainability 10 (2018) doi: 10.3390/su10124373 [Google Scholar]
  38. J. Huang et al., Numerical investigation of a novel vacuum photovoltaic curtain wall and integrated optimization of photovoltaic envelope systems, Appl. Energy 229, 1048–1060 (2018) [Google Scholar]
  39. Y. Luo, L. Zhang, Z. Liu, X. Su et al., Coupled thermal-electrical-optical analysis of a photovoltaic-blind integrated glazing facade, Appl. Energy 228, 1870–1886 (2018) [Google Scholar]
  40. A. Tablada et al., design optimization of productive facades: integrating photovoltaic and farming systems at the tropical technologies laboratory, Sustainability 10 (2018) [Google Scholar]
  41. K. Sornek, M. Filipowicz, J. Jasek, The use of fresnel lenses to improve the efficiency of photovoltaic modules for building-integrated concentrating photovoltaic systems', J. Sustain. Dev. Energy Water Environ. Syst. 6, 415–426 (2018) [Google Scholar]
  42. A. Karthick et al., Performance study of building integrated photovoltaic modules, Adv. Build. Energy Res. 12, 178–194 (2018) [Google Scholar]
  43. W. Zhang, L. Lu, J. Peng, Evaluation of potential benefits of solar photovoltaic shadings in Hong Kong, Energy 137, 1152–1158 (2017) [Google Scholar]
  44. S. Tak et al., ‘Effect of the changeable organic semi-transparent solar cell window on building energy efficiency and user comfort, Sustainability 9 (2017) [Google Scholar]
  45. M. Wang et al., Comparison of energy performance between PV double skin facades and PV insulating glass units, Appl. Energy 194, 148–160 (2017) [Google Scholar]
  46. G.Y. Palacios-Jaimes et al., Transformation of a University Lecture Hall in Valladolid (Spain) into a NZEB: LCA of a BIPV system integrated in its facade, Int. J. Photoenergy (2017) doi: 10.1155/2017/2478761 [Google Scholar]
  47. L.A.A. Bunthof et al., Impact of shading on a flat CPV system for facade integration, Solar Energy 140, 162–170 (2016) [Google Scholar]
  48. K. Connelly et al., Design and development of a reflective membrane for a novel Building Integrated Concentrating Photovoltaic (BICPV) ‘Smart Window’ system', Appl. Energy 182, 331–339 (2016) [Google Scholar]
  49. M. Wang et al., Assessment of energy performance of semi-transparent PV insulating glass units using a validated simulation model, Energy 112, 538–548 (2016) [Google Scholar]
  50. F. Favoino et al., Optimal control and performance of photovoltachromic switchable glazing for building integration in temperate climates, Appl. Energy 178, 943–961 (2016) [Google Scholar]
  51. S.F.H. Correia et al., Scale up the collection area of luminescent solar concentrators towards metre-length flexible waveguiding photovoltaics, Progr. Photovolt. 24, 1178–1193 (2016) [Google Scholar]
  52. Y. Wu et al., Smart solar concentrators for building integrated photovoltaic facades, Sol. Energy 133, 111–118 (2016) [Google Scholar]
  53. M. Sabry, Prismatic TIR (total internal reflection) low-concentration PV (photovoltaics)-integrated facade for low latitudes, Energy 107, 473–481 (2016) [Google Scholar]
  54. J. Cipriano et al., Development of a dynamic model for natural ventilated photovoltaic components and of a data driven approach to validate and identify the model parameters, Solar Energy 129, 310–331 (2016) [Google Scholar]
  55. J. Hofer et al., Parametric analysis and systems design of dynamic photovoltaic shading modules, Energy Sci. Eng. 4, 134–152 (2016) [Google Scholar]
  56. J. Peng et al., Numerical investigation of the energy saving potential of a semi-transparent photovoltaic double-skin facade in a cool-summer Mediterranean climate, Appl. Energy 165, 345–356 (2016) [Google Scholar]
  57. L.S. Pantic et al., Electrical energy generation with differently oriented photovoltaic modules as facade elements, Thermal Sci. 20, 1377–1386 (2016) [Google Scholar]
  58. H.-M. Liu et al., Improving the performance of a semitransparent bipv by using high-reflectivity heat insulation film, Int. J. Photoenergy (2016) doi: 10.1155/2016/4174216 [Google Scholar]
  59. J. Kang, C. Cho, J.-Y. Lee, Design of asymmetrically textured structure for efficient light trapping in building-integrated photovoltaics, Org. Electr. 26, 61–65 (2015) [Google Scholar]
  60. Y. Luo, L. Zhang, Z. Liu, J. Wu et al., Numerical evaluation on energy saving potential of a solar photovoltaic thermoelectric radiant wall system in cooling dominant climates, Energy 142, 384–399 (2018) [Google Scholar]
  61. R.J. Yang, Overcoming technical barriers and risks in the application of building integrated photovoltaics (BIPV): hardware and software strategies, Autom. Construct. 51, 92–102 (2015) [Google Scholar]
  62. J. Lee et al., Renewable energy potential by the application of a building integrated photovoltaic and wind turbine system in global urban areas, Energies 10 (2017) [Google Scholar]
  63. C.-M. Lai, S. Hokoi, Solar facades: a review, Build. Environ. 91, 152–165 (2015) [Google Scholar]
  64. C. Lai, S. Hokoi, Experimental and numerical studies on the thermal performance of ventilated BIPV curtain walls, Indoor Built Environ. 26, 1243–1256 (2017) [Google Scholar]
  65. M. Debbarma, K. Sudhakar, P. Baredar, Thermal modeling, exergy analysis, performance of BIPV and BIPVT: a review, Renew. Sustain. Energy Rev. 73, 1276–1288 (2015) [Google Scholar]
  66. R.A. Agathokleous, S.A. Kalogirou, Double skin facades (DSF) and building integrated photovoltaics (BIPV): a review of configurations and heat transfer characteristics, Renew. Energy 89, 743–756 (2016) [Google Scholar]
  67. X. Zhang et al., Active Solar Thermal Facades (ASTFs): From concept, application to research questions, Renew. Sustain. Energy Rev. 50, 32–63 (2015) [Google Scholar]
  68. Z. Nagy et al., The adaptive solar facade: from concept to prototypes, Front. Architectur. Res. 5, 143–156 (2016) [Google Scholar]
  69. J. Peng et al., Comparative study of the thermal and power performances of a semi-transparent photovoltaic facade under different ventilation modes, Appl. Energy 138, 572–583 (2015) [Google Scholar]
  70. A. Chialastri, M. Isaacson, Performance and optimization of a BIPV/T solar air collector for building fenestration applications, Energy Build. 150, 200–210 (2017) [Google Scholar]
  71. H. Dehra, An investigation on energy performance assessment of a photovoltaic solar wall under buoyancy-induced and fan-assisted ventilation system, Appl. Energy 191, 55–74 (2017) [Google Scholar]
  72. M. Smyth et al., Experimental performance characterisation of a hybrid photovoltaic/solar thermal facade module compared to a flat integrated collector storage solar water heater module, Renew. Energy 137, 137–143 (2019) [Google Scholar]
  73. S. Barman et al., Assessment of the efficiency of window integrated CdTe based semi-transparent photovoltaic module', Sustain. Cities Soc. 37, 250–262 (2018) [Google Scholar]
  74. M. Ahmed-Dahmane, A. Malek, T. Zitoun, Design and analysis of a BIPV/T system with two applications controlled by an air handling unit', Energy Convers. Manag. 175, 49–66 (2018) [Google Scholar]
  75. A. Gaur, G.N. Tiwari, Analytical expressions for temperature dependent electrical efficiencies of thin film BIOPVT systems, Appl. Energy 146, 442–452 (2015) [Google Scholar]
  76. A. Buonomano et al., BIPVT systems for residential applications: an energy and economic analysis for European climates, Appl. Energy 184, 1411–1431 (2016) [Google Scholar]
  77. J. Oh et al., An integrated model for estimating the techno-economic performance of the distributed solar generation system on building façades: focused on energy demand and supply, Appl. Energy 228, 1071–1090 (2018) [Google Scholar]
  78. M.A.C. Sousa, L. Aelenei, H. Gonçalves, Comportamento térmico de um protótipo BIPV combinado com armazenamentode água: análise experimental, in CIES2020-XVII Congresso Ibérico e XIII Congresso Ibero-americano de Energia Solar. LNEG-Laboratório Nacional de Energia e Geologia (2020) 1167–1174 [Google Scholar]
  79. J.M. Lourenço et al., Thermal behavior of a BIPV combined with water storage: an experimental analysis, Energies 14, 2545 (2021) [Google Scholar]
  80. K. Bot, L. Aelenei, H. Gonçalves, Design de um protótipo BIPVT e análise por meio de computação dinâmica de fluídos, in CIES2020-XVII Congresso Ibérico e XIII Congresso Ibero-americano de Energia Solar. LNEG-Laboratório Nacional de Energia e Geologia (2020) pp. 1185–1192 [Google Scholar]
  81. L. Aelenei, R. Pereira, A. Ferreira et al., Building Integrated Photovoltaic System with integral thermal storage: a case study, Energy Proc. 58, 172–178 (2014) [Google Scholar]
  82. L. Aelenei, R. Pereira, H. Gonçalves et al., Thermal performance of a hybrid BIPV-PCM: modeling, design and experimental investigation, Energy Proc. 48, 474–483 (2014) [Google Scholar]
  83. R. Pereira, L. Aelenei, Optimization assessment of the energy performance of a BIPV/T-PCM system using genetic algorithms, Renew. Energy (2018) [Google Scholar]
  84. K. Bot et al., Performance assessment of a building integrated photovoltaic thermal system in mediterranean climate—a numerical simulation approach’, Energies 13 (2020) [Google Scholar]
  85. K. Bot et al., Performance assessment of a building-integrated photovoltaic thermal system in a mediterranean climate—an experimental analysis approach, Energies 14, 2191 (2021) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.