Issue |
Renew. Energy Environ. Sustain.
Volume 1, 2016
|
|
---|---|---|
Article Number | 35 | |
Number of page(s) | 5 | |
DOI | https://doi.org/10.1051/rees/2016042 | |
Published online | 29 August 2016 |
Research Article
Sewage sludge gasification process for clean and sustainable environment
Institute of Thermal Technology, Silesian University of Technology,
Gliwice, Poland
⁎ e-mail: sebastian.werle@polsl.pl
This work presents a multicriterial investigation of the sewage sludge gasification in the fixed bed gasifier. The operating parameters of gasification were varied over a wide range. Parameters such as air ratio λ = 0.12–0.27, gasification agent preheating t = 50–250 °C and gasification agent composition (zO2 = 0.21 and zO2 > 0.21) were found to influence syngas lower heating value and syngas composition.
© S. Werle, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.